Requirements for the installation site of the high and low temperature test chamber

Nowadays, the high and low temperature test chamber is selected by many industries, and the high and low temperature test chamber is mainly used for damp heat testing of electrical appliances, instruments, materials and vehicle protection components, etc., and the high and low temperature test chamber adopts a reasonable structure and stable and reliable control mode. Then we buy an instrument, of course, there are certain standards and specifications for the requirements for placing the installation site of the high and low temperature test chamber:

The following requirements for the installation site of high and low temperature test chambers are as follows:

In addition, the high and low temperature test chamber itself is an environmental test chamber that simulates harsh environments, and its installation site and environment should not be sloppy. In general, we have to follow the following general principles!

1. The outer box (including wheels) of the high and low temperature test chamber must be effectively grounded to ensure the safety of equipment and the safety of personnel.

2. The high and low temperature test chamber should be placed in a well-ventilated room and in a horizontal position, and no flammable and explosive materials should be placed around it. 　

3. In the installation line of the high and low temperature test chamber, an iron shell knife switch should be installed in the power supply line, for this box to be special, please check the electrical performance of the box before the shell is grounded and energized, and should pay attention to whether there is an open circuit or leakage.

(It should also be noted that this test chamber has no explosion-proof device and shall not be dried with flammable and explosive materials.) (Special requirements can be customized!) The contents of the box should not be overcrowded, and space must be left to facilitate hot air circulation.

4. Do not arbitrarily remove the top cover, disturb or change the line, but when the box fails, the side door can be removed, and the line can be checked one by one. If there is a major failure, it should be stopped immediately, please check by professionals, and do not operate blindly!